Strawbale wall insulation

Strawbale wall insulation consist in filling the voids between the timber frame structure with straw blocks and covering them from the external side with VestaEco LDF UNI or THERM rigid insulation board. The external insulation board may be finished with a thin layer plaster. High heat capacity of the wall is additionally increased with a clay plaster layer laid from the internal side on VestaEco LDF board.

Layer description:

1. Lime - sand plaster 10 mm on 10x10 mm glass fiber mesh
2. Lime finishing 2 mm
3. Potassium varnish
4. VestaEco LDF UNI / THERM, 800x1200 mm
5. Straw block 400 mm
6. Timber frame structure
7. VestaEco LDF 15 mm
8. Clay plaster reinforced with VestaEco M jute mesh
9. Carpentry screws with washers or staples
10. VestaEco LDF 15 mm